Skip to main content

How To Find & Fix Roof Leaks

The roof is your home’s primary safety net, and it’s essential to have regular inspections to keep it in good condition. Doing so will allow you to extend its life and save money on repairs. One of the most critical steps that you can take to keep your roof in good condition is to catch any leaks immediately. 

A leak could lead to mold growth and other issues in your home if it’s not fixed immediately. In addition, it could cause you to spend thousands of dollars on repairs. This guide will teach you how to identify and fix roof leaks. 

How to Find Roof Leaks 

Although it’s easy to spot a mold or water stain on your ceiling, there are other situations where a leak might not have gotten noticed. Having a thorough inspection can help you identify roof leaks. 

Inspect Attics 

It would be best if you started by looking at your attic, as it will give you a good view of the underside of your roof. You should also take a step with your ladder to check for signs of roof damage such as dark areas, moisture, and mold. 

Look For Damaged Insulation. 

If there’s damage in the insulation, you must inspect where the water leak is coming from. It can be as far away as a couple of feet from the insulation. If the water path goes directly above the damaged insulation, follow it. 

Check For Sharp Objects On The Roof. 

Sharp objects such as nails, rocks, and tree branches can lead to roof leaks. It would help if you also inspected the area near the vents for any holes the debris may have caused. 

Use A Hose To Spray The Roof. 

Although you may not have seen snow or rain in a long time, you still need to patch any holes in your roof as soon as possible. After you’ve applied a hose to the area, you should check for signs of moisture in the attic. 

How To Fix The Leaking Roof 

After you have found a leak, it’s time to apply roofing cement and secure new shingles. This step-by-step guide will walk you through the process. 

Install New Shingles 

If missing or old shingles need replacing, you’ll need to replace them. Before installing new shingles, you’ll need to remove damaged ones using a pry bar. Then, using a utility knife, you’ll need to round the back corners of the existing shingle and slide it under it. To secure the new one in place, use roofing nails

Re-attach Curled Shingles 

Some types of curled shingles can be easily re-attached using roofing cement. To do this, apply a cement layer over the existing shingles and let it set. 

Repair Flashing 

One of the most common reasons for water leaks in your home is damaged flashing. This issue can be fixed by re-sealing the joints. To do this, you’ll need to use a caulking gun and apply a coat of cement. 

Even though you have learned how to identify a leak, sometimes your roof requires the help of a pro. If you want your asphalt shingle roof to last longer and save money, you can call us for professional roof repairs. Our eco-efficient technology can extend its life by up to 15 years, and we can help you with any of your roof repairs.


Leave a Reply

Your email address will not be published. Required fields are marked *

Roofing Contractor